Portable dehumidifier

 Whirlpool  AD25GUSX (DV1012)

 Danby DDR401 (DV1012)

 

 Revolution LGR  (RGH storage)

Whirlpool 50-pint dehumidifier

Model AD25GUSX

Moisture removal: 25L/day

 

Danby Dehumidifier

Model DDR401

Moisture removal: 19L/day 

See manual for use instruction and other information

 

Operate Revolution LGR Dehumidifier

Dri-Eaz Model F413

RH Setpoint:  40 to 90%, increments of 5

 

Methods:

  1. Connect hose to condensate drip on the lower left side of dehumidifier.  Direct the other end of the hose to a drain.
  2. Plug and turn on the portable dehumidifier.  Wait until self-diagnostic process is complete.
  3. Press Display Menu once to go to “JOB HOURS RESET?”.  Press Menu Selection key to reset hours to zero.
  4. Press Display Menu multiple times until display shows “HUMIDISTAT MODE”.  Select “ON” by pressing Menu Selection key.
  5. Press Display Menu to go to “HUMIDISTAT SETPOINT”.  Select desired relative humidity (RH) value by pressing Menu Selection key. 

 

Accessories:

  1. Dri-Eaz 4-PRO Four Stage Filter F583
  2. Ducting options for outlet: Layflat Ducting - F268 or Duct Attachment Kit – F530

See manual for more information.

 

Booking is not required. You may request for Environmental sensor use/other equipment training at Bookitlab Reservations page if you are using the equipment for the first time.